In addition to its wide-bandwidth Ultra-Linear Noise-Dissipation, the PQ 707 includes Transient Power Correction.
Transient Power Correction provides a current reservoir of up to 45 amps peak on-demand power for any amplifier (up to 25mS), supplying the low-impedance current the amp needs to produce thrilling dynamic contrasts, bass extension, and control.
All models come with optional 2RU rack ears and a detachable 2m PowerQuest power cable with a flat-to-wall plug. For installers, this means each PowerQuest unit is ready to go from the box to the rack in just minutes.
Dimensions: 17in W x 3.4in H x 13.4 D (3.5in H with feet)
Weight: 10.8lbs
PQ-715 Power Cable with Flat-to-Wall Plug
RF-Noise Dissipating cable with Semi-Solid Concentric Long-Grain Copper (LGC) Conductors, ZERO-Tech for uncompressed current transients, and RF/ND-Tech for unprecedented Noise-Dissipation (2m; 15amps @120V)
Ultra-Linear Noise-Dissipation (More than -22dB)
Differential-Mode: 30kHz-1GHz (PQ-505); 8kHz-1GHz (PQ-707); Common-Mode: 30kHz-100MHz (both models)
Non-Sacrificial Surge Protection
Nothing to damage with repeated 6000V/3000A input surge tests, which is the maximum that can survive a building’s AC electrical panel.
Extreme Voltage Shutdown
140VAC: Will activate the main power circuit relay to open within less than 0.25 seconds; automatically resets once the incoming power is within a safe range.
45-Amp Transient Power Correction with Current Reservoir
Provides a current reservoir for any power amplifier (45 amps peak; up to 25mS)
Optimized Outlets
8x Linear-Filtered for Source / Constant-Current components (TVs, media streaming devices, etc.); 4x High-Current for Variable-Current components (amplifiers, powered speakers & subwoofers)
Rack-Mountable
2RU rack ears included
